ASTM D6474-20《Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography》由ASTM International发布。Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography用于塑料、橡胶与高分子材料凝胶渗透色谱 GPC/SEC涉及的相应产品、材料或样品检测。在本站对应塑料、橡胶与高分子材料凝胶渗透色谱 GPC/SEC，相关项目记录样品、仪器条件、原始数据和结果。
ASTM D7027-20《Standard Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch Machine》用于涂层耐划伤与耐刮擦测试。页面列出适用对象、样品要求、试验方法、质量控制、数据记录和报告内容。
ASTM D7334-08(2022)《Standard Practice for Surface Wettability of Coatings, Substrates and Pigments by Advancing Contact Angle Measurement》用于接触角与表面润湿性测试。本页列出适用对象、样品准备、仪器条件、测量步骤、质量控制、数据记录和报告内容。
ASTM D7490-13(2022)《Standard Test Method for Measurement of the Surface Tension of Solid Coatings, Substrates and Pigments using Contact Angle Measurements》用于接触角与表面润湿性测试。本页列出适用对象、样品准备、仪器条件、测量步骤、质量控制、数据记录和报告内容。
ASTM D790-25《Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials》适用于相关检测项目。本页整理标准对象、试样、设备、实施步骤、数据处理和报告记录。
ASTM E1421-99(2021)《Standard Practice for Describing and Measuring Performance of Fourier Transform Mid-Infrared (FT-MIR) Spectrometers: Level Zero and Level One Tests》用于显微红外污染物分析。本页列出适用对象、样品准备、仪器条件、测量步骤、质量控制、数据记录和报告内容。
ASTM E1458-12(2022)《Standard Test Method for Calibration Verification of Laser Diffraction Particle Sizing Instruments Using Photomask Reticles》用于激光粒度与粒径分布分析。本页列出适用对象、样品准备、仪器条件、测量步骤、质量控制、数据记录和报告内容。
ASTM E169-16(2022)《Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis》由ASTM International发布。Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis规定塑料、橡胶与高分子材料紫外可见近红外光谱 UV-Vis-NIR的测量原理、仪器条件、数据采集和结果记录要求。在本站对应塑料、橡胶与高分子材料紫外可见近红外光谱 UV-Vis-NIR、涂料、胶黏剂与精细化学品紫外可见近红外光谱 UV-Vis-NIR、食品、药品与日化产品紫外可见近红外光谱 UV-Vis-NIR、环境、异物与未知物紫外可见近红外光谱 UV-Vis-NIR，相关项目记录样品、仪器条件、原始数据和结果。
ASTM E1695-20e1《Standard Test Method for Measurement of Computed Tomography (CT) System Performance》用于Micro-CT内部孔隙率分析。本页列出适用对象、样品准备、仪器条件、测量步骤、质量控制、数据记录和报告内容。
