ISO 12571:2021 建筑材料与制品吸湿等温性能测定
ISO 12571:2021 建筑材料与制品吸湿等温性能测定规定水蒸气与有机蒸气吸附中的多孔建筑材料水蒸气子项按该标准获得规定温湿度下的平衡相关的实施要求，内容包括ISO 12571:2021在水蒸气与有机蒸气吸附、水分吸附与解吸等温线；项目交付ISO 12571:2021方法实施信息与水蒸气与有机蒸气吸附。
查看完整内容STANDARDS DIRECTORY
检测标准分类目录
按行业解决方案、检验、测试、仪器测试、分析和认证六类浏览国内外标准详情。已发布标准
2574按发布日期浏览全部标准，点击标题查看完整内容和相关服务。
ISO 13317-1:2024 重力液体沉降法测定粒度分布 通则
ISO 13317-1:2024 重力液体沉降法测定粒度分布 通则用于ISO 13317-1:2024用于沉降法粒径与分布的筛分的仪器测试，项目按标准完成ISO 13317-1:2024在沉降法粒径与分布中落实标准规定的测量步骤与技术参数并形成ISO 13317-1:2024方法实施信息与沉降法粒径与分布实测结。
查看完整内容ISO 13318-1:2024 Determination of particle size distribution by centrifugal liquid sedimentation methods — Part 1: General principles and guidelines
依据ISO 13318-1:2024 Determination of particle size distribution by centrifugal liquid sedimentation methods — Part 1: General principles and guidelines开展仪器测试时。
查看完整内容ISO 13318-2:2007 Determination of particle size distribution by centrifugal liquid sedimentation methods — Part 2: Photocentrifuge method
依据ISO 13318-2:2007 Determination of particle size distribution by centrifugal liquid sedimentation methods — Part 2: Photocentrifuge method开展仪器测试时，适用对象包括ISO 13318-2:2007用于离心沉降超细颗粒分析的筛分。
查看完整内容ISO 13318-3:2004 Determination of particle size distribution by centrifugal liquid sedimentation methods — Part 3: Centrifugal X-ray method
依据ISO 13318-3:2004 Determination of particle size distribution by centrifugal liquid sedimentation methods — Part 3: Centrifugal X-ray method开展仪器测试时，适用对象包括ISO 13318-3:2004用于离心沉降超细颗粒分析的筛分。
查看完整内容ISO 13322-1:2014 静态图像分析法测定颗粒粒度
依据ISO 13322-1:2014 静态图像分析法测定颗粒粒度开展仪器测试时，适用对象包括ISO 13322-1:2014用于粉体与颗粒材料颗粒图像与形状分析的静态图，实施内容包括ISO 13322-1:2014在粉体与颗粒材料颗粒图像与形状分析、浆料，交付ISO 13322-1:2014方法实施信息与粉体与颗粒材料颗粒图像。
查看完整内容ISO 14577-2:2026 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 2: Verification and calibration of testing machines
ISO 14577-2:2026 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 2: Verification and calibration of testing machines规定塑料、橡胶与复合材料纳米压痕与微纳力学按该标准。
查看完整内容ISO 14577-4:2016 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 4: Test method for metallic and non-metallic coatings
ISO 14577-4:2016 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 4: Test method for metallic and non-metallic coatings适用于涂料、胶黏剂与流体材料纳米压痕与微纳力学。
查看完整内容ISO 14707:2021 辉光放电光发射光谱使用指南
ISO 14707:2021 辉光放电光发射光谱使用指南适用于ISO 14707:2021用于镀层与涂层深度剖析的辉光放电光谱采集。仪器测试按该标准执行ISO 14707:2021在镀层与涂层深度剖析、扩散层、渗层与氧化层分析，形成ISO 14707:2021方法实施信息与镀层与涂层深度剖析。
查看完整内容ISO 15900:2020 气溶胶颗粒差分电迁移率粒度分析
ISO 15900:2020 气溶胶颗粒差分电迁移率粒度分析规定ISO 15900:2020用于空气动力学粒径分布的气溶胶粒径分布相关的实施要求，内容包括ISO 15900:2020在空气动力学粒径分布、喷雾；项目交付ISO 15900:2020方法实施信息与空气动力学粒径分布、喷雾。
查看完整内容ISO 15989:2004 Plastics — Film and sheeting — Measurement of water-contact angle of corona-treated films
依据ISO 15989:2004 Plastics — Film and sheeting — Measurement of water-contact angle of corona-treated films开展仪器测试时，适用对象包括ISO 15989:2004用于高分子、胶黏剂与复合界面接触角与表面能的静态。
查看完整内容ISO 16000-42:2023 Indoor air — Part 42: Measurement of particle number concentration by condensation particle counters
ISO 16000-42:2023 Indoor air — Part 42: Measurement of particle number concentration by condensation particle counters用于ISO 16000-42:2023用于气溶胶数量与质量浓度的气溶胶粒径分布的仪器测试。
查看完整内容ISO 16000-6:2021 Indoor air — Part 6: Determination of organic compounds (VVOC, VOC, SVOC) in indoor and test chamber air by active sampling on sorbent tubes, thermal desorption and gas chromatography using MS or MS FID
ISO 16000-6:2021 Indoor air — Part 6: Determination of organic compounds (VVOC, VOC, SVOC) in indoor and test chamber air by active sampling on sorbent tubes, thermal desorption and gas chr。
查看完整内容ISO 16243:2011 Surface chemical analysis — Recording and reporting data in X-ray photoelectron spectroscopy (XPS)
ISO 16243:2011 Surface chemical analysis — Recording and reporting data in X-ray photoelectron spectroscopy (XPS)适用于XPS数据记录与报告。仪器测试按该标准执行记录激发源、分析器、通能、能量步长、荷电校正和谱图处理，形成保留原始谱、能量标定、峰参数、背景和定量字段。
查看完整内容ISO 16413:2020 Evaluation of thickness, density and interface width of thin films by X-ray reflectometry — Instrumental requirements, alignment and positioning, data collection, data analysis and reporting
ISO 16413:2020 Evaluation of thickness, density and interface width of thin films by X-ray reflectometry — Instrumental requirements, alignment and positioning, data collection, data analys。
查看完整内容ISO 16773-2:2016 Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens — Part 2: Collection of data
依据ISO 16773-2:2016 Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens — Part 2: Collection of data开展仪器测试时，适用对象包括电化学阻抗谱仪器分析 EIS按ISO 16773-2:2016采集涂漆和未涂。
查看完整内容ISO 16773-4:2017 Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens — Part 4: Examples of spectra of polymer-coated and uncoated specimens
ISO 16773-4:2017 Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens — Part 4: Examples of spectra of polymer-coated and uncoated specimens规定频率响应与等效电路拟合按I。
查看完整内容ISO 17224:2015 Corrosion of metals and alloys — Test method for high temperature corrosion testing of metallic materials by application of a deposit of salt, ash, or other substances
依据ISO 17224:2015 Corrosion of metals and alloys — Test method for high temperature corrosion testing of metallic materials by application of a deposit of salt, ash, or other substances开展分析服。
查看完整内容RELATED SERVICES