National Service Hotline400-889-2690

ANALYSIS SERVICES

Failure Analysis and Complex Investigations

Our own laboratories provide fracture, corrosion, foreign-matter, formulation and material-difference analysis. Preserve samples and relate context and controls before selecting methods. Observations, possible mechanisms and causal evidence are distinguished; a single result cannot guarantee a unique cause or determine liability.

Preserve evidence before adding tests

We arrange fracture, corrosion, contamination and material-difference work. Position, timing, batch, loads, environment and repair history matter alongside the specimen; keep paired parts and normal controls where possible.

Do not polish fractures, remove corrosion products or consume all foreign matter before recording locations. Agree and document necessary sampling and treatment; further instruments cannot restore evidence already lost.

Different problems require different routes

Fractures relate surfaces and crack paths to loads; corrosion relates distribution and products to environment; foreign matter needs substrate and possible-source references. Our own laboratories combine appropriate methods, not a compulsory full-instrument package.

Identification, quantitative content and process reconstruction are different tasks. Changed samples, local variation, missing context and selectivity limit answers. Inconsistent data call for condition checks rather than removal of an inconvenient result.

State how far the evidence supports the explanation

Reports separate observations, supported modes, possible contributors and unresolved questions. Additional verification can be proposed, but an element alone does not establish a source and a feature alone does not establish the unique cause.

Technical investigation, regulated forensic work, certification decisions and liability have different roles and procedures. Agree report use first; ordinary analysis does not automatically become a statutory opinion, and proposed corrective work needs validation.

Useful evidence for analysis

  • Failed specimens, paired parts and normal or same-batch controls
  • Location photographs, timing and operating/process records
  • Cleaning, dismantling, repair and other treatment
  • Question, permitted consumption and report use

Our own laboratories provide listed analyses; the number of methods or category name does not establish a root cause.

Failure and complex analysis

Can one damaged sample be analysed?

Yes, with representation, control and historical limitations stated. Preserve it and send photographs, drawings and records; findings do not guarantee reconstruction of the entire event.

Are listed analyses performed by your own laboratories?

Yes. Our own laboratories and technical teams provide the listed work and arrange microscopy, composition, structure or performance methods around the question. Agree consumption, conditions and outputs first.

Does one abnormal result identify the root cause?

No. Position, controls, loads, environment and timing also matter. Separate manufacture, service changes and later damage, and test other plausible explanations.

Does the report decide compensation responsibility?

No. It provides bounded technical evidence; contractual or legal responsibility and admissibility are determined by the relevant authorised parties from all material. Confirm regulated procedures separately.

Full directory and project search10 categories · 136 topics · 544 specific servicesClose directory

SERVICE DIRECTORY

Failure Analysis & Technical Diagnosis

10 professional categories · 136 service topics · 544 specific services
01

Composition & Formulation Analysis

Composition, proportions, additives and impurities in materials and products.

12+48
Unknown & Major Component IdentificationService category · 4 specific services
Formulation Composition & ProportionService category · 4 specific services
Additive, Aid & Filler IdentificationService category · 4 specific services
Organic, Inorganic & Elemental AnalysisService category · 4 specific services
Purity, Impurities & Trace ContaminantsService category · 4 specific services
Odour & Volatile AnalysisService category · 4 specific services
Competitor Formulation BenchmarkingService category · 4 specific services
Formulation Adjustment & Verification SupportService category · 4 specific services
Targeted Component Identification & QuantificationService category · 4 specific services
Degradation Products, By-products & Transformation ProductsService category · 4 specific services
Residual Monomer, Solvent & Oligomer AnalysisService category · 4 specific services
Raw-material Source & Synthesis-route AssessmentService category · 4 specific services
02

Material Identification & Authenticity

Material type, grade, source and product authenticity.

11+44
Metal Grade & Material IdentificationService category · 4 specific services
Plastic, Rubber & Fibre IdentificationService category · 4 specific services
Mineral, Ceramic & Inorganic IdentificationService category · 4 specific services
Oil, Fuel & Chemical IdentificationService category · 4 specific services
Food, Agricultural & Species AuthenticityService category · 4 specific services
Authenticity, Adulteration & SubstitutionService category · 4 specific services
Incoming & Declared Material ConsistencyService category · 4 specific services
Material Mix-up & Cross-use InvestigationService category · 4 specific services
Virgin, Recycled & Reclaimed Material DifferentiationService category · 4 specific services
Expiry, Deterioration & Degradation AssessmentService category · 4 specific services
Reference-to-questioned Sample ComparisonService category · 4 specific services
03

Failure Analysis

Root-cause investigations based on failure mode, service and evidence.

20+80
Fracture, Cracking & FractographyService category · 4 specific services
Corrosion, Pitting & SCCService category · 4 specific services
Wear, Scratching & Surface DamageService category · 4 specific services
Ageing, Embrittlement & DegradationService category · 4 specific services
Leakage, Sealing & Tightness FailureService category · 4 specific services
Discolouration, Blooming & OdourService category · 4 specific services
Coating Delamination & Adhesion FailureService category · 4 specific services
Electronic Device & PCB FailureService category · 4 specific services
Battery Safety & Thermal Runaway FailureService category · 4 specific services
Fatigue, Creep & Long-term FailureService category · 4 specific services
Deformation, Warpage & Dimensional InstabilityService category · 4 specific services
Insufficient Strength, Stiffness & Load CapacityService category · 4 specific services
Delamination, Debonding & Interface FailureService category · 4 specific services
Overheating, Ablation & Thermal DamageService category · 4 specific services
Noise, Vibration & Operational AbnormalityService category · 4 specific services
Electrical Insulation, Contact, Open & Short FailureService category · 4 specific services
Optical, Display & Appearance DefectsService category · 4 specific services
Assembly, Fastening & Joint FailureService category · 4 specific services
Packaging Damage & Transport FailureService category · 4 specific services
Design, Stress Concentration & Structural FailureService category · 4 specific services
04

Contamination & Foreign Matter

Identification and source tracing of foreign matter, deposits and residues.

13+52
Particle, Spot & Foreign Matter IdentificationService category · 4 specific services
Surface Contamination & Residue AnalysisService category · 4 specific services
Oil, Cleaner & Process ResidueService category · 4 specific services
Deposit, Scale & Blockage AnalysisService category · 4 specific services
Packaging, Migration & Cross-contaminationService category · 4 specific services
Cleanliness & Particle Source AnalysisService category · 4 specific services
Contamination Source Comparison & TracingService category · 4 specific services
Blooming, Exudation & Migration AnalysisService category · 4 specific services
Extractables & Leachables AnalysisService category · 4 specific services
Oil Contamination & Wear-debris DiagnosisService category · 4 specific services
Microbial, Mould & Biological Contamination TracingService category · 4 specific services
Residual Solvent & Cleaning VerificationService category · 4 specific services
High-purity Material, Process-gas & Clean-environment ContaminationService category · 4 specific services
05

Comparison & Consistency

Comparison across batches, suppliers, competitors and process changes.

12+48
Batch Consistency EvaluationService category · 4 specific services
Supplier Material ComparisonService category · 4 specific services
Competitor & Internal Product BenchmarkingService category · 4 specific services
Pre/post Change Material & Process ComparisonService category · 4 specific services
Good-versus-failed Sample ComparisonService category · 4 specific services
Alternative Material EquivalenceService category · 4 specific services
Supplier Change & Second-source QualificationService category · 4 specific services
Formulation, Raw-material & Process Change VerificationService category · 4 specific services
Line, Factory & Equipment Transfer ConsistencyService category · 4 specific services
Pre/post Ageing & Service ComparisonService category · 4 specific services
Imported-versus-domestic Material ComparisonService category · 4 specific services
Inter-laboratory, Method & Equipment ComparisonService category · 4 specific services
06

Process & Quality Problem Analysis

Manufacturing anomalies and quality variation across material, process and equipment.

16+64
Welding, Heat Treatment & Machining IssuesService category · 4 specific services
Moulding, Extrusion & Forming DefectsService category · 4 specific services
Coating, Plating & Surface Treatment IssuesService category · 4 specific services
Curing, Bonding & Sealing IssuesService category · 4 specific services
Cleaning, Drying & Cleanliness IssuesService category · 4 specific services
Storage, Transport & Environmental EffectsService category · 4 specific services
Equipment Operation & Condition IssuesService category · 4 specific services
Quality Variation & Key-factor InvestigationService category · 4 specific services
Raw-material Variation & Incoming AbnormalityService category · 4 specific services
Dosing, Mixing & Dispersion Non-uniformityService category · 4 specific services
Casting, Forging, Sintering & Powder-metallurgy DefectsService category · 4 specific services
Printing, Lamination & Film-bonding IssuesService category · 4 specific services
Electronics Assembly, Soldering & Packaging IssuesService category · 4 specific services
Assembly, Fastening & Fit-up IssuesService category · 4 specific services
Packaging, Filling & Sealing Process IssuesService category · 4 specific services
Moisture, Solvent & Volatile-control IssuesService category · 4 specific services
07

Reliability & Life Analysis

Failure behaviour, life distribution and residual risk from test and field data.

13+52
Accelerated Life Test DesignService category · 4 specific services
Weibull & Life Distribution AnalysisService category · 4 specific services
Degradation Trend AnalysisService category · 4 specific services
Reliability, Failure Rate & MTBFService category · 4 specific services
Remaining Life & Maintenance IntervalService category · 4 specific services
Environmental & Load-spectrum EquivalenceService category · 4 specific services
HALT, HASS & Limit TestingService category · 4 specific services
Failure Reproduction & Acceleration-factor VerificationService category · 4 specific services
Reliability Growth & Weak-link IdentificationService category · 4 specific services
Field-failure & Warranty-data AnalysisService category · 4 specific services
FMEA, Fault-tree & Risk-priority AnalysisService category · 4 specific services
Design Margin & Limiting-condition AssessmentService category · 4 specific services
Fitness-for-service & Remaining-strength AssessmentService category · 4 specific services
08

Method Development & Validation

Development, optimisation and validation of methods for non-standard objects.

11+44
Non-standard Method DevelopmentService category · 4 specific services
Preparation & Pretreatment OptimisationService category · 4 specific services
Qualitative & Quantitative Method SetupService category · 4 specific services
LOD, LOQ & LinearityService category · 4 specific services
Accuracy, Precision & RecoveryService category · 4 specific services
Specificity, Stability & RobustnessService category · 4 specific services
Method Transfer, Verification & UncertaintyService category · 4 specific services
Trace, Small & Precious-sample StrategyService category · 4 specific services
On-site, In-situ & Non-destructive Analysis StrategyService category · 4 specific services
Multi-method Analysis StrategyService category · 4 specific services
Rapid Screening & In-house Control MethodService category · 4 specific services
09

Data & Spectral Interpretation

Processing, quantification and interpretation of spectra, images and multidimensional data.

12+48
Spectral, Chromatographic & MS InterpretationService category · 4 specific services
XRD Phase, Refinement & CrystallinityService category · 4 specific services
XPS Peak Fitting & Chemical-state AnalysisService category · 4 specific services
Microscopy & Microstructure QuantificationService category · 4 specific services
Particles, Pores & 3D ReconstructionService category · 4 specific services
Statistics, Chemometrics & Multivariate AnalysisService category · 4 specific services
Multi-method Evidence Integration & Technical ReportingService category · 4 specific services
Atypical Result & OOS/OOT InvestigationService category · 4 specific services
Third-party Report Review & Technical ReassessmentService category · 4 specific services
Raw-data Integrity & Traceability ReviewService category · 4 specific services
Test-to-simulation CorrelationService category · 4 specific services
Trend, Process-capability & Statistical Process AnalysisService category · 4 specific services
10

R&D & Technical Appraisal Support

Testing and analysis for R&D, material selection and technical appraisal.

16+64
Material Selection & Substitution EvaluationService category · 4 specific services
Formulation Optimisation & Process ValidationService category · 4 specific services
Product R&D & Proof of ConceptService category · 4 specific services
Technical Route & Test-plan DesignService category · 4 specific services
Research Project & Achievement Data SupportService category · 4 specific services
Quality Dispute & Technical AppraisalService category · 4 specific services
Expert Review, Litigation & Evidence SupportService category · 4 specific services
Domestic Substitution & Supply-chain Cost ReductionService category · 4 specific services
Reverse Engineering & Product TeardownService category · 4 specific services
Failure Reproduction & Corrective-action VerificationService category · 4 specific services
Process Window, Scale-up & Production TransferService category · 4 specific services
Structural Design & Material-compatibility ReviewService category · 4 specific services
Repair, Remanufacturing & Recurrence-prevention VerificationService category · 4 specific services
Complaint, Return & Recall Technical SupportService category · 4 specific services
Incident, Insurance & Causation InvestigationService category · 4 specific services
Intellectual-property & Patent Technical SupportService category · 4 specific services

Technical enquiry

Start with the anomaly and evidence

We provide the relevant analysis. Send photographs, context, controls and previous treatment to arrange stages and report use without prescribing responsibility or a unique cause.
Call 400-889-2690Email Your Request
PROJECT ENQUIRY

Testing Request & Technical Enquiry

We provide the relevant analysis. Send photographs, context, controls and previous treatment to arrange stages and report use without prescribing responsibility or a unique cause.

  • Failed specimens, paired parts and normal or same-batch controls
  • Location photographs, timing and operating/process records
  • Cleaning, dismantling, repair and other treatment
  • Question, permitted consumption and report use
Testing RequestTell Us About Your Sample and Requirement

Provide the sample or equipment, testing objective and intended report use. Fields marked * are required.