STANDARDS DIRECTORY
已发布标准
2574按发布日期浏览全部标准，点击标题查看完整内容和相关服务。
ISO 1133-1:2022 Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics — Part 1: Standard method用于相关检测项目中采用ISO 1133-1:2022实施的样品、部件的测试服务。
查看完整内容ISO 11357-2:2020 Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and step height适用于DSC差示扫描量热分析中采用ISO 11357-2:2020实施的材料。
查看完整内容ISO 11357-3:2025 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization适用于DSC差示扫描量热分析、DSC聚合物结晶度分析中采用ISO 11357-。
查看完整内容依据ISO 11359-1:2023 Plastics - Thermomechanical analysis (TMA) - Part 1: General principles开展仪器测试时，适用对象包括TMA热机械分析中采用ISO 11359-1:2023实施的材料、样品或产品，实施内容包括依据ISO 11359-1:2023规定的适用对象、取样制样、仪器配置。
查看完整内容ISO 11359-2:2021 Plastics - Thermomechanical analysis (TMA) - Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature用于TMA热机械分析、线膨胀系数CTE测试中采用ISO 11。
查看完整内容ISO 11505:2025 Surface chemical analysis - General procedures for quantitative compositional depth profiling by glow discharge optical emission spectrometry规定辉光放电光谱GDOES镀层深度分析中采用ISO 11505:2。
查看完整内容ISO 1183-1:2025 Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pycnometer method and titration method用于相关检测项目中采用ISO 1183-1:2025实施。
查看完整内容依据ISO 11885:2007 Water quality - Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES)开展仪器测试时，适用对象包括水样、化学品与环境样品电感耦合等离子体发射光谱 ICP-OES中采用ISO。
查看完整内容依据ISO 11952:2019 Surface chemical analysis - Scanning-probe microscopy - Determination of geometric quantities using SPM: Calibration of measuring systems开展仪器测试时。
查看完整内容ISO 13099-2:2025 Colloidal systems - Methods for zeta-potential determination - Part 2: Optical methods适用于Zeta电位与分散稳定性分析中采用ISO 13099-2:2025实施的材料。
查看完整内容ISO 13320:2020 Particle size analysis - Laser diffraction methods用于激光粒度与粒径分布分析中采用ISO 13320:2020实施的材料的仪器测试，项目按标准完成依据ISO 13320:2020规定的适用对象、取样制样、仪器配置并形成ISO 13320:2020仪器分析报告及实测结果。
查看完整内容ISO 13468-1:2019 Plastics - Determination of the total luminous transmittance of transparent materials - Part 1: Single-beam instrument适用于Plastics - Determination of the total。
查看完整内容ISO 13885-1:2020 Gel permeation chromatography (GPC) - Part 1: Tetrahydrofuran (THF) as eluent用于Gel permeation chromatography (GPC) -的仪器测试。
查看完整内容依据ISO 14577-1:2026 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method开展仪器测试时，适用对象包括纳米压痕硬度与弹性模量测试中采用ISO 14577-1:2026实施的材料。
查看完整内容ISO 1463:2021 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method规定扫描电镜涂层截面厚度与界面分析中采用ISO 1463:2021实施的材料相关的实施要求，内容包括依据ISO 1463:2021规定的适用对象、取样制样、仪器配置。
查看完整内容ISO 14911:1998 Water quality - Determination of dissolved Li+, Na+, NH4+, K+, Mn2+, Ca2+, Mg2+, Sr2+ and Ba2+ using ion chromatography - Method for water and waste water用于水样、化学品与环境样品离子色谱 IC。
查看完整内容ISO 1518-1:2023 Paints and varnishes — Determination of scratch resistance — Part 1: Constant-loading method规定相关检测项目中采用ISO 1518-1:2023实施的样品、部件相关的实施要求，内容包括依据ISO 1518-1:2023规定的范围、样品、设备、试验条件。
查看完整内容依据ISO 15350:2000 Steel and iron - Determination of total carbon and sulfur content - Infrared absorption method after combustion in an induction furnace (routine method)开展仪器测试时。
查看完整内容RELATED SERVICES
